This Wade & Butcher was restored to its former glory and rescaled with wooden kingwood or snakewood scales.
Wade & Butcher Restore & Wood Scales
Leave a reply
Author Archives: Lee
Thiers Issard Le Grelot Rescale
This Le Grelot was rescaled with Birdseye Maple scales with a red plastic liner. Custom pins were used. The blade was given a quick touch up via our cleaning service.
Imperial Razor Restoration & Scales
This Imperial Razor was sent in to be re-shoed and restored. We restored the razor to its former glory and installed black TI scales.
Before
After
Ern Restoration & Rescale
This razor was sent in to be restored and rescaled with factory TI scales.
Wade & Butcher Restoration with Streaked Horn Scales
This W&B razor was fully polished & restored. Then it was rescaled with custom streaked black horn scales. These scales are a unique design you will not find on any vintage razor.
Wade & Butcher Restoration Blonde Horn Scales
This Wade & Butcher was restored to it’s prime via our razor restoration service. The razor was not in the best condition when it arrived. You can notice some pitting that is still visible even after restoration, indicating some pretty bad rust. The razor was rescaled with custom blond horn scales.
Frederick Reynolds Restoration Horn Custom Scales
This Frederick Reynolds was fully restored via our restoration service. The blade was polished to its former glory. Perhaps even better. The blade was then rescaled using custom black horn scales.
ASR Reviews: Thiers Issard Straight Razors
Thiers Issard has been making quality straight razors in France since 1884. In addition to razors, they produce other fine cutlery such as kitchen knives. Today, they are one of the two biggest manufacturers of straight razors in existence. Over the years we have honed and used many Thiers Issard razors; from older vintage razors, NOS Le Grelots (not actually a Thiers Issard blade), to modern Silverwings. Over the years, Thiers Issard has proven themselves committed to providing the customer quality cutlery. The scales on the above razor were a custom rescale job we did. We also polished the blade to bring out a true mirror finish. Yet, even with all the upgrades, you can tell this razor is a truly great piece of steel. The lack of a bolster and curved thumb holder are excellent features. This is one of our favorite razors.
The steel Thiers Issard uses on their standard razors is excellent. Thiers Issard has been called the “shaver’s razor,” and this nickname is entirely accurate. Out of today’s mass manufacturers, Thiers Issard is quite probably the best steel. Read our article on what makes a razor sharp for more information on what makes steel good. Thiers Issard normally hones up to an extremely keen edge. However, honing a Thiers Issard is not for amateurs, it is extremely time consuming and much more difficult than most other razors. Once the Thiers Issard is honed to perfection, it tends to stay that way for a while and provides a most excellent shave.
The scales and quality controls are Thiers Issard’s Achille’s heel. While Thiers Issard makes an excellent blade, the same cannot be said of their scales. For their most basic razor, the scales are just a cheap plastic with cheap pins. The pins are the same regardless of how much you spend on your Thiers Issard. It is generally said that you get what you pay for with Thiers Issard, so it is best not to buy their cheaper razors. While their pricier razors come with nicer scales, the quality does not scale with the price particularly well. The bottom line is that the scales could be better, but they are fully functional with pretty good balance as a whole.
Thiers Issard’s quality control and gold wash is not particularly good. It is sad to say that Dovo actually produces a better gold wash. Some TI’s have misaligned gold wash and in the past the gold wash has been very thin. Thiers Issard increased the thickness as of late.
For all their faults, the only real downside with buying a Thiers Issard is the price. While you generally get what you pay for with Thiers Issard, they get extremely expensive, extremely quickly. The only other downside is the difficulty in honing. This is not a DIY razor, it is highly recommended to consult a professional hone-meister.
How to Care for Your Razor
Unless you want your razor to look like this, read on
I get asked this question often and have come across many poorly maintained straights. So this post is to show you how to keep your well honed razor sharper longer, and prevent rust.
Rust is the enemy. Corrosion eats away at the edge and turns your well honed razor into a not so well honed piece of steel. Unfortunately, there is no escaping the fact that a straight razor requires more care to keep the edge well honed and rust free. But if you follow these steps it shouldn’t be too difficult or time consuming.
- Dry your razor off thoroughly after each use. Water both causes and accelerates rusting. Water is the enemy of steel. To make sure your razor is thoroughly dried, you have a number of options: dip the blade in alcohol (the most severe), wipe it off thoroughly on a dry towel (emphasis on dry), or you can strop it on the canvas portion after the shave and drying it on a towel. If you choose to use the towel method use your thumb and forefinger to “sandwich” the razor in between two sides of the towel, then strop backwards a couple of time on a dry area to get the last of the water droplets off the edge. It is important that you remove any water that got in between the scales and in the pivot area.
- Keep your razor away from moisture. Bathrooms are an inhospitable environment for steel. A well-honed razor isn’t going to stay well-honed for very long if left exposed to the humidity of a bathroom. Ideally you would store your straight razor away from the moisture, but this is not always possible.
- Keep the straight in a waterproof container. If you must store your straight in the bathroom, make sure you store it in a waterproof container. Travel toothbrush holders work well for this task. A less effective method is to just wrap the razor in wax paper; while it works, it isn’t ideal. Use dessicant packs as an extra precaution against humidity.
- Oil the blade. This is a necessary step if you live near salt water (salt water corrodes steel extremely quickly). This is an optional step for everyone else. If you don’t have a waterproof container, the layer of oil will protect your blade from rust. But it does dry out so it does need to be re-applied if your putting your straight into long term storage. It is not foolproof, nor is it waterproof, so you should check your razor if storing it for any lengthy period of time. Any oil works, but should consider the fact that you’ll be wiping it off before each shave. I prefer light mineral oil (you have to request it from the pharmacy sometimes) but regular mineral oil also works. Camellia oil is another popular choice.
- Strop! While you absolutely, positively, don’t need to own a strop or strop your razor. Stropping sure helps keep the rust off your well honed razor.
Straight Shaving Benefits: It’s the cheapest way to shave!
According to this new blog post by John Tischler, Going Green by Shaving Straight, straight shaving is the cheaper than DE shaving! Now, everyone knew that straight razor + hone = set for life if you don’t break the razor. But Mr. Tischler’s math proves that DE’s are more expensive than straights even if you use a hone-meister! The math is in the article, however, he doesn’t state how many times you have to re-hone per year. We recommend once every 180 days of use. Of course, it’s only $10 per hone if you use our re-honing service. But I’m getting off-track. The point is, straight razor shaving is the cheapest means of shaving; even if you use a honemeister to sharpen & hone your razor for you!
Further savings can be had if you buy a vintage straight razor. There is no advantage to buying a modern razor as opposed to a restored vintage razor or one in great shape. You also don’t need a fancy strop. Any piece of good quality leather will suffice. Finally, you should be shaving with a brush and soap anyway, so these shouldn’t be additional costs. Finally, buying your own hone may be cheaper in the long run, but in the short term it is actually not cost effective. You need to buy an expensive finishing stone rated at least 12,000 grit; 16,000+ is better. But more importantly, you must invest a lot of time into learning how to hone. Even more time than you invested learning how to straight shave. At $100 for a finishing stone, you could purchase five year’s worth of professional honing.
Either way you go, the proof is in the numbers. Straight shaving is the cheapest way to shave!